Combined Voltage & Current meter, allows you to quickly find faults/shorts on electric fence. No earth lead needed.

Remote-Control device with built in voltage & current meter.

Enables accurate testing of fence and energizer earth system.

Speed Tool.  Uses a drill to power a gear reduced arbor that wraps wire tightly around its own diameter.

Speed Tool!  Use a drill to power a gear that will make installing barb wire much easier.

This lightweight, high quality fencing tool cuts high tensile wire, splices 12 ½ gauge wire, removes staples, & strips electric fence cable.

This tool will cut high tensile wire, splices 8, 9, 10, & 12 ½ gauge smooth wire, 12 ½ gauge & 15 gauge barb wire, plus high tensile electric fence taps.

This tool is used to correctly compress crimping sleeves to make stronger splices.  Will crimp FW4-5, 3-4, 2-3, & 1-2 sleeves.

A great all around tool it has hardened jaws, can be used on both high-tensile and low carbon wire to bring wires together for fence repairs or tensioning. Comes with a 4 foot chain to give you plenty of room to make repairs.

This tool is designed for positive play out of 60 lb & 103 lb coils of high tensile wire.

Used with the Gripples to tension up joined wire and cable. 

Rope pulley with scissor clamps is used to tighten Electrobraid.

3:1 Gear Ratio.  Holds 1650' of polywire or 660' of polytape.  Galvanized Steel Frame.  UV stabilized Bobbin. 

The Stretcher Bar comes with steel wedges, which firmly hold the woven wire fence while it is being tensioned.  Wedges are placed vertically on the bar. 

German made high tensile wire cutter.  It’s small jaw allows trimming of fixed knots & of double alloy wire.

Available for 9 or 11 ga wire ties.

The drill chuck wraps the tails of the post clip & pipe clips securely.

Holds 3300' of polywire or 1320' of polytape.  1:1 Gear Ratio.  Galvanized Steel Frame.  UV Ray Stabilized Bobbin